Industrial Facility Concrete Packages

We survey existing structure and services, scan or daylight where required, verify demolition limits, establish temporary access and protection, and confirm equipment and anchor information against structural details. Concrete placement planning sets mix, truck access, pump location, placement rate, consolidation, finishing, joint timing, testing, curing, temperature control, and protection from plant traffic.

The governing document set is the 2024 Ontario Building Code, CSA A23.1 and A23.2, CSA A23.3, engineer and equipment-vendor details, project flatness and finish criteria, and facility permit requirements. Industrial slabs may require defined F-number, surface regularity, abrasion, curing, hardener, moisture, or coating-preparation criteria. Testing and acceptance methods are established before placement.

The price responds to concrete volume, reinforcing, form complexity, embeds, demolition, subgrade, access, shutdown duration, pumping, finish tolerance, curing protection, testing, coatings interfaces, and equipment coordination. Poor joint layout transfers cracks into process or coating areas. We coordinate construction, control, isolation, and equipment joints with slab geometry, restraints, drains, and final finishes.

The controlling schedule factors are vendor information, scanning and demolition, shutdown windows, forming and reinforcing, inspection, concrete supply, finishing, cure and strength gain, grouting, coating preparation, and equipment setting dates. Concrete placement planning sets mix, truck access, pump location, placement rate, consolidation, finishing, joint timing, testing, curing, temperature control, and protection from plant traffic.

Yes. We plan barriers, clean access, dust and water control, temporary services, delivery windows, noise, hot-work interfaces, cure protection, and daily turnover around operating equipment and production routes. Congested embeds and reinforcing can block concrete flow and create honeycombing. We review clearances, placement access, vibrator paths, and pour direction before closing forms.

We document survey, substrate and base acceptance, reinforcing and embeds, concrete tickets, air, slump, temperature and strength tests, finish and elevation checks, curing, joints, grout, and equipment-interface dimensions. Specified compressive strength, water-to-cementing-materials ratio, air content, slump, fibres, aggregate size, temperature, and supplementary cementing materials are confirmed on approved mix submissions and tickets.

Provide structural, process, mechanical, electrical, and vendor drawings, equipment loads and anchor templates, geotechnical data, existing records, shutdown limits, finish criteria, testing, access, and required equipment dates. Concrete placement planning sets mix, truck access, pump location, placement rate, consolidation, finishing, joint timing, testing, curing, temperature control, and protection from plant traffic.